Goot CP-1515

CP-1515 1.5mm x 15m 30m Resoldering welding Wick wire RMA BGA IC PCB Chipset reballing Braid wash Flux Remover Cleaner

Goot CP-2515

CP-2515 2.5mm x 1.5m 20m Resoldering welding Wick wire RMA BGA IC PCB Chipset reballing Braid wash Flux Remover Cleaner

CP-2015 2.0mm x 1.5m 30m Resoldering welding Wick wire RMA BGA IC PCB Chipset reballing Braid wash Flux Remover Cleaner

$5.50
Place the solder wick over the area to be desoldered, apply your hot soldering iron and the solder will be soaked up into the braid,
Availability: In stock
SKU
BGAT-GOOTCP2015
CP-2015 2.0mm x 1.5m 30m Resoldering welding Wick wire RMA BGA IC PCB Chipset reballing Braid wash Flux Remover Cleaner is available to buy in increments of 1
 
 
 
 

1pcs Resoldering Wick for BGA chipset RMA

 

  • High quality desoldering wick with braided copper wire, saturated with RMA flux.
  • It can be used without fear of damaging precision PCBs.
  • More BGA tool products, click here.
  • Need more this item or out of stock, please contact us.

How to use >>>

  1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
  2. Remove the desoldering wick after the solder has been absorbed.
  3. Cut off the used section of the wick using nippers.
  4. Repeat the stes 1,2 and 3 if the solder is not removed completely.Absorbability may differ depending on the ype of solder,SN63% and 60%(tin content) have good absorbability. 
 
 
 
 
More Information
Brand of Product Goot
Product Type Soldering Wick Wire
Model Number CP-2015
Dimension 2.0mm x 1.5m / 2.0mm x 30m
Condition New
UPC 6698558167623
Write Your Own Review
You're reviewing:CP-2015 2.0mm x 1.5m 30m Resoldering welding Wick wire RMA BGA IC PCB Chipset reballing Braid wash Flux Remover Cleaner
Your Rating